Split Bobbin Power Transformers

Split Bobbin Power Transformers

Power Transformers for Printed Circuit
Application in 6 Sizes:

1.1VA, 2.5VA, 6VA, 12VA, 20VA, 36VA

split.gif (7605 bytes)

SNC power transformers are designed for printed circuit applications for use in single, dual or rectified DC power supplies, or isolated control circuits in electrical and electronic equipment.

SNC Transformers Feature:

Non-concentric winding, achieved by secondary being
wound alongside primary rather than directly
over it, to lower interwinding capacitance, thus eliminating
the use of an electrostatic shield.
Dual Primaries: 115/230V, 50/60 Hz.
2500 V RMS Hipot
Recognized component Underwriters Laboratories, Inc.

Modifications Available:

Non-standard voltage and current ratings
Class B insulation- 130 degrees Celsius
Environmental protection by potting, casting,
transfer molding, epoxy dip, vacuum impregnating
Thermal cutouts on some designs
Other specials- contact factory

split1.gif (15507 bytes) split2.gif (2956 bytes)

split3.gif (4944 bytes)

Model Series	VA	L	W	H	ML	A	B	C	Opt. Mtg. Screw & Nut	Lbs.
200	1.1	1 3/8	1 1/8	1 5/16	-	.250	.250	1.200	None	0.17
300	2.4	1 3/8	1 1/8	1 3/16	-	.250	.250	1.200	None	0.25
400	6	1 5/8	1 5/16	1 5/16	1 1/16	.250	.350	1.280	4-40 x 1 3/8 Nylon	0.44
500	12	1 7/8	1 9/16	1 7/16	1 1/4	.300	.400	1.410	4-40 x 1 3/8 Nylon	0.70
600	20	2 1/4	1 7/8	1 7/16	1 1/2	.300	.400	1.600	4-40 x 1 3/8 Nylon	0.80
700	36	2 5/8	2 3/16	1 9/16		.400	.400	1.850		1.1

SNC Manufacturing Co., Inc. 101 West Waukau Avenue
Oshkosh, WI 54902-7299 Phone: 920.231.7370 FAX: 920.231.1090
E-mail: rshaw@sncmfg.com http://www.sncmfg.com