telhead.gif (8212 bytes)

Induction Neutralizing Transformers - (INTs)



Induction Neutralizing Transformers

INTs Only

ints.gif (29021 bytes)

M=MS2 Splice (pluggable)
Modules (3M)

NOTE: 25 Pair 3M MS2 mods are standard. AT&T #710 mods are available with 10 day lead time

Size Part Number
2 Pair/M P15577
6 Pair/M P15356
12 Pair/M P15369
25 Pair/M P15301
50 Pair/M P15320
100 Pair/M P15902

INT Accessories

Part No. Description
P15098 Pole Mounting Hardware Kit for 20" or 24" wide enclosure
P15102 Pole Mounting Hardware Kit for 30" or 36" wide enclosure
P15099 19" Rack Panel Kit
P15101 23" Rack Panel Kit
P15104 9" high legs for pad mounting a 12" deep enclosure
P15108 2 electrode gas tube for 3 electrode protector holder
21147T4 3 electrode gas tube
P15817 23" Rack Panel Kit for 25 and 50 system Digital INTs

INTs Installed in Steel Enclosure

Letter after pair is enclosure size.

Size Part Number
2 Pair/B P15573
6 Pair/B P15579
12 Pair/C P15584
25 Pair/C P15730
25 Pair/D P15595
50 Pair/C P15759
100 Pair/C P15770
100 Pair/D P15606
150 Pair/D P15739
200 Pair/D P15705
300 Pair/E P15768
400 Pair/F P15772
900 Pair/H P15417

M=MS2 Splice (pluggable) Modules (3M)


Enclosures

Weatherproof, vented enclosures are made of 14 GA steel, painted inside and out with gray-green enamel. Special fiberglass enclosures are available for corrosive areas. External clamps or captive screws secure the gasketed door. A hasp and staple are provided for padlocking. Watertight strain relief cable entrance bushings are provided for incoming cable stubs. Bushing allows up to two 1.10" diameter cables. PCM INTs come with two bushings that will handle 2" cable.


Enclosure Sizes

B = 18 x 12 x 6" (45.7 x 30.5 x 15.2 cm)
C = 24 x 24 x 12" (61 x 61 x 30.5 cm)
D = 36 x 30 x 12" (91.4 x 76.2 x 30.5 cm)
E = 42 x 30 x 12" (106.7 x 76.2 x 30.5 cm)
F = 48 x 36 x 12" (121.9 x 91.4 x 30.5 cm)
G = 42 x 60 x 12" (106.7 x 152.4 x 30.5 cm)
H = 60 x 60 x 12" (152.4 x 152.4 x 40.6 cm)
I = 60 x 36 x 12" (152.4 x 91.4 x 30.5 cm)

INTs For Direct Burial

Installed in Polyvinyl Enclosure With (1)10 Foot Stub

intdb.gif (25947 bytes)

Size Part #
25 Pair P15300
50 Pair P15318
100Pair P15904



SNC Manufacturing Co., Inc. bullet.gif (149 bytes) 101 West Waukau Avenue
Oshkosh, WI 54902-7299 bullet.gif (149 bytes) Phone: 920.231.7370 bullet.gif (149 bytes) FAX: 920.231.1090

E-mail: telecom@sncmfg.com bullet.gif (149 bytes) http://www.sncmfg.com