At SNC, We’ll Put The Power Of Our Lyte Lynx® Isolation Protection Equipment To Work For You. SNC Manufacturing…Making Hi-Tech Work In The Real Telephone World.

SNC Lyte Lynx® Provides The Best Value And Quality In The Industry And Lower Cost Per Slot.

P31006 and P31035 Data Isolation Stand Alone Fiberglass Enclosures

  • P31006 4-Wire T-Carrier Isolation in Stand Alone Fiberglass Enclosure
    P31006 4-Wire T-Carrier Isolation in Stand Alone Fiberglass Enclosure
  • P31035 4-Wire 56kbs Isolation in Stand Alone Fiberglass Enclosure
    P31035 4-Wire 56kbs Isolation in Stand Alone Fiberglass Enclosure

The Lyte Lynx® P31006 and P31035 Data Isolation interface models are mounted as stand alone units and do not require a card shelf. No powering is required for these passive devices.

The P31006 provides an isolated interface for DS1 (such as T1) data circuits, including SuperFrame, Extended SuperFrame and single or multi-channel DSO transmission, as well as any other digital channel with a primary signaling frequency in the 10kHz – 2MHz range. Frequency response is 2kHZ- 6MHz. The P31006 model consists of two P31043 2-wire transformers mounted inside a fiberglass enclosure.

For more detailed information on the Lyte Lynx 4-Wire T-Carrier Enclosure, refer to installation instructions T0360 Rev. A.

The P31035 provides an isolated interface for Synchronet services and digital data services operating at 56k bits per second (bps) and sub-rates (including 72, 64, 56, 25.6, 19.2, 12.8, 9.6, 6.4, 4.8, 3.2 and 2.4 kbps), basic rate ISDN, analog signals for data modems, SCADA, tone relay control, analog carrier and tone signaling up to 100 kHz. The P31035 model consists of two P31042 2-wire transformers mounted inside a fiberglass enclosure.

For more detailed information on the Lyte Lynx 4-Wire 56kbs Enclosure, refer to installation instructions T0361 Rev. A.