At SNC, We’ll Put The Power Of Our Lyte Lynx® Isolation Protection Equipment To Work For You. SNC Manufacturing…Making Hi-Tech Work In The Real Telephone World.

SNC Lyte Lynx® Provides The Best Value And Quality In The Industry And Lower Cost Per Slot.

P30115 Single Line HDSL2 Card With Sealing Current

  • P30115 - Lyte Lynx® Single Line HDSL2 Card With Sealing Current
    P30115 - Lyte Lynx® Single Line HDSL2 Card With Sealing Current

The P30115 isolation card is designed for installation in an SNC Lyte Lynx® Card Shelf or Teleline Isolator* Card Shelf. No powering is required for these passive devices.

These data isolation models provide an isolated interface for 2-wire (P30115) digital or analog data circuits. Types of digital circuits protected include rates of 2.4 kbps to 72 kbps as used in services such as Synchronet, Basic Rate ISDN and HDSL carrier frequencies.

Types of analog circuits protected include rates of 100 Hz to 200 kHz as used in analog carrier, modems, SCADA, tone relay control and tone signaling.

The primary function of the cards is to provide isolation from hazardous voltages while being “transparent” in the circuit. All signaling information within the specified frequency bandwidth will be unaffected.  However, DC signaling is not supported. A secondary function is to provide optional connections for the loop back of DC simplexed sealing current or repeater powering on the remote (Central Office) side.

See the 56kbs/HDSL Transformer Insertion Loss Graph and Performance Specifications Table.

For more detailed information on Lyte Lynx® Single Line HDSL2 Isolation Cards with Sealing Current, refer to installation instructions T0401.

To access the DATA RATE chart of SNC Telecom Parts, refer to Data Rate Chart for Lyte Lynx® Cards.

*Teleline Isolator is a trademark of Position Industries, Inc.